Care for Your Club

Made to be played. Made to be refreshed.

Today’s Campfire Clubs are finished with Odie’s Oil for their signature matte sheen. Unlike polyurethane, it isn’t a hard film that encapsulates the wood. Its natural character remains, and the finish can be refreshed instead of stripped and replaced.

A few bumps, scrapes and scratches just mean you’re having fun. They tell the story of a club that’s being played. But if you prefer to keep yours looking pristine, a minor mark can often be gently sanded out and the finish renewed.

The marks of a round well played are part of the character.

Everyday Care

  • Wipe down the wooden head and shaft with a soft cloth after play.
  • Keep wood and leather as dry as possible. If you play in rain, just wipe the club clean and let it dry naturally afterward.
  • A headcover is recommended.

The Oil Finish

A typical Campfire Club is finished to 800 grit and receives three coats of Odie’s Oil. Buff it in and buff off the excess. The oil finish provides water resistance, not a hard waterproof shell, and can be refreshed whenever needed.

Earlier clubs used tung oil; Odie’s Oil is the current finish. If your club has an older finish and you’re unsure what to apply, ask Jeff first.

Refreshing a Scratch

A simple guide for minor marks. Each step has room for a demonstration photo later.

  1. Clean and dry

    Wipe the area with a soft cloth and let the wood dry completely.

  2. Work out the mark

    Gently use a card scraper or sandpaper with the grain, removing only as much wood as needed to soften or eliminate the scratch.

  3. Go finer and finer

    Work through progressively finer sandpaper grits, blending the area into the surrounding wood until it almost feels polished. Campfire Clubs are typically finished up to 800 grit.

  4. Reapply Odie’s Oil

    Apply a little Odie’s Oil following the product directions. Buff it into the wood, then buff away excess and allow it to cure as directed before playing. Refresh again as needed.

Copper & Brass Sole Plates

Most players enjoy the patina that develops with use. For a brighter look, gently polish with a soft copper/brass polishing cloth or a suitable mild metal polish, protecting the wood and leather from the polish. Sole plates can also be removed and replaced in the shop if needed.

Leather, Whipping & Grips

Wipe leather handles clean with a soft cloth and allow them to dry naturally. Loose whipping is easily replaced. We can also change grip colors and handle thickness in the shop — bring the club by or arrange to send it in.

Need a Hand?

From a fresh grip or new whipping to a sole plate repair or refinishing touch-up, your club can always come back for a little attention.

Ask Jeff About Club Care

For deep damage, loose parts or an unfamiliar finish, contact the shop before sanding or polishing.